Make A Wish

Hello Card Lovers,
     I am here with a quick post, I will be doing another post in a few hours for a GIVE- AWAY !!!
This card I will be showing you, will be entered into the challenge going on over at Fantabulous Cricut. The Challenge was to use a candle. Here is what I came up with....

Materials Used

Birthday Bash Cricut Cartridge

Hopscotch Cricut Imagine Cartridge

Scrappy Mom's Stamps (Simple Sentiments)

DCWV Solid Cardstock

CuttleBug Embossig Folders

Orange Crush Glitter

Studio G Rhinestones

Button From Stash

Yellow Bakers Twine

White Gel Pen

3D Foam Squares

Zig Glue Pen

 

    My Card base measures 4.25x5.5. My Candles are cut from page 51 in the Birthday Bash handbook, I cut the candles along with all there layers a 2.75". My background paper with the banners on it, is cut from the Cricut imagine Hopscotch cartridge. I decided to use my lose orange crush glitter to get the sparkle on the flames.I went around the yellow portion of the flames with my zig glue pen,this works best for adhering lose glitter because the glue dry clears and it's not chunky.Then to top it all off, I used the super cute stamp from the Scrappy Mom's, I suggest everyone checks out there blog, they have great products for sale.

    I hope you all enjoy this cute little Birthday card!! If you have further questions feel free to ask, make sure to stop my blog later to check out the Give-away. I will be picking a winner at random once I reach 50 Followers.

Thanks & Happy Scrapping"

Brianna

    

 

 

So Thankful For You

Good Morning Card Lovers,
     It's finally Saturday Ya-Who. It's a gorgeous fall day here in northern Minnesota and I am stuck at work until 3:00, yuck!! I am super excited cause my sister and I might be having a craft day today :) I think when I get out of work, I might also put up Halloween decorations.
      For today's post I am going to be showing you a super cute fall card I made. I will be submitting this over at My Craft spot for the "Falling Leaves Challenge". I used my Imagine to make this card, the Image came from the, Good Old Days cartridge. Well without further ado, here it is.

Materials Used

Cricut Imagine Cartridge (Good Old Days)

Elegant Edges Cricut Cartridge

My Craft Spot Stamp Set

Grey Bakers Twine 

DCWV Solid Card Stock

Button From Stash

Stick Pins From Stash

K&Co. Rhinestones

Tim Holtz, Tea Dye Distress Ink

3D Foam Squares

White Gel Pen

My card base measure 4.25 x 5.5. I cut my little girl with her puppy at 3.5" and my mat is cut at 4.75. I cut my little girl out twice so I could overlap the images and pop them up. I Just adore, how this little card turned out. I hope you all like it as well. 

Just a heads up to all my bloggy friends I will putting up another post for a giveaway. Details soon to come. 

Thanks & Happy Scrapping"

                                                                         Brianna

Enjoy The Ride, End Of Summer

Hello Card Lovers,
     One thing I always Enjoy doing in the summer is going on a bike ride, but not just any bike ride. Recently my husband and I just sold are Yamaha R6  motorcycle. This was are little get away, we would just hop on and without a plan in mind, just go. We were able to enjoy it a couple times this summer before we sold it, it's kinda hard to just get up and go when you have a 15 month old.
     I bought the bike for my Hubby 2 years ago for our anniversary, I know it broke his heart getting rid of it.We decided once Jayden was a little bit older, we are going to get a cruiser, this will make for a much more comfortable ride !!
     Well on with my card, I decided to use this cute little vespa scooter on my card. I thought this fit the bill perfectly, and because I didn't have a Cartridge with a motorcycle on it !!

   Materials Used

Best Friends Cricut Imagine Cartridge

Flower Shoppe Cricut Cartridge

DCWV Cardstock

CTMH Stamp

Ribbon From Stash

Button from Stash

Bakers Twine

Stickles

Clear Rhinestone

3D Foam Squares

  ATG Adhesive

   Fiskars Corner Punch

My Card measures 5x5, I used just white cardstock to make the base of my card and then layered some Yellow DCWV paper on top of it. The blue gingham paper was printed using the same cartridge. I cut the scooter and  4" and I cut it out twice, so I could do all the layering. I hope you can all see by the 2nd photo all the dimension this card has.

 I hope you all enjoyed my card !!!

Thanks for stopping by and Happy Scrapping"

                                                                                        Brianna

            

            

    

Trick Or Treat

Hello Card Lovers,
     I just got done making, yet another Halloween card, I told you all it was my favorite holiday. I totally planned on making more than one card tonight but my crafting OCD kicked in and I got a little obssed with this one. I definitely think it worked out in my favor though, I just love this card. I will post at the bottom what challenges I will be entering this card into. Well on with the card....

Inside

Materials Used
Happy Haunting's Cricut Cartridge
DCWV Bewitched Paperstack
Studio G Stamps & Rhinestone's
Ribbon From Stash
Buttons From Stash
Bakers Twine
Cuttle bug Embossing Folder
3D Foam Squares
Sewing Machine
ATG Adhesive

     Do you all see what I meant when I said I got a little obsessed. I think it turned out great though, what do you all think ? I did a lot of matting and there's a whole lot of popping going on.

My card is: 5.25"x4.75"

Black mat: 5"x4.5

Purple mat: 4.75"x4.25"

Green mat: 4.5"4"

     I  just winged it on the matting for the sentiment. I only used one cartridge for this entire card and that was Happy Haunting's. listed below are all the dimension's of the cuts.

Skeleton: 4"

Grave: 3.75"

Cat: 2"

Bat: 1.5"

     I did the same measurements for the matting on the inside of the card. I slightly embellish the inside of my cards and then leave enough space for a personalized measure. I like to write long little messages, so I always like to make sure there is plenty of room.

     I will be entering this into the Terrific Tuesday Challenge over at Scrappy Mom's Blog (Halloween) and The Cardz T.V. Challenge Blog (Bling It Up).

     Well I hope you all enjoyed my Halloween card for the night and hope everyone gets a lot of rest and enjoys there Friday !!!

Thanks & Happy Scrappin"

Brianna

    

Happy Haunting

Hello Card Lovers,
     I am here with one more quick post for the night, It's 1:00am and this momma is ready for bed !! I made this not so spooky Halloween card for the challenge over at Cardz T.V. blog. The challenge was this...
Challenge#116: “Creature Feature"
Make a card for Halloween using the card feature from any cartridge, and using any colors you’d like.

Hear is what I came up with......

Materials Used

Mini Moster Cricut Cartridge

DCWV Bewitched Cardstock Stack

My Pink Stamper Stamps

Candy Corn Embossing Folder

Googly Eyes

Buttons from Stash

Black Gel Pen

Bakers Twine (Pink & Orange)

  

    This was cut at 5", I used the very first image in the cartridge handbook and used the card feature. I think this not so scary monster card turned out pretty good. I love the bright fun colors, and just to think these all came from a Halloween paper stack.

     If you would like more details on this card feel free to ask, Sorry but I have to get some shut eye.

I'm on 10 hour shifts possibly the rest of this week, yuck. Hopefully I will get to do a couple more post this week. Thanks for stopping by !!!

Happy Scrappin'

Brianna

U R the Best !

Hello Card Lovers,
     I am here with a shape card to show you that I made using my gypsy. I will be entering this into the current challenge going on over at Peachy Keen, PKS Challenge 35 :: Just Cards :: Teacher.
     I got my new set of Peachy Keen, The Cornies, in the mail today and I knew I had to use them. Here is what I came up with, I hope you all like it .

Materials Used

Peachy Keen Stamps ( PK-294 The Cornies 1 1/8")

Simply Charmed Cricut Cartridge'

My Craft Spot Stamp Set's (Thank You & Tiny Tags 1&2)

DCWV Cardstock

Buttons From Stash

Blue Bakers Twine

Pebbles Chalk

White & Black Gel Pen

Cuttlebug Embossing Folder

 

     I am not going to go into full detail on how I made this card because its almost 1:00am and I have to be up in 5 hours. I used my gypsy to weld two of the crayon boxes together they measure at 5.5" along with all the layers. I went ahead and doodled faux stitch marks around most elements on the card, to make them stand out more.

     I just love how this card turned out!! I will gladly give out more details on the card if you just let me know, what you would like to know. I hope you all enjoy and thanks for stopping by.

Happy Scrappin'

Brianna

 

 

You're Wicked Cool

Hello Card Lovers ,
   I hope everyone's night is going great. I have been in my craft room, for most of the night making this card for the Fun Friday challenge over at Little Scrap Pieces. The challenge was "Action", we had to make a card that had pretty much a moving element to it.
    This is the first time ever that I have made a card like this. I decided to make a Swing Card, these is a pretty ornate card, it's easy to make but of course when it comes to decorating I take forever. My husband said he is pretty sure I have OCD because I have to make sure everything is perfect.
     Well I hope everyone enjoys my card, I just love, love how it turned out. I think this card will be going to my Momma and Poppa for Halloween. Yeah, that's right I am 25 years old and I am a huge Momma and Poppa Girl, it comes with being the baby of the family :) Love you Mom and Dad!!!

Materials Used

Mini Monsters Cricut Cartridge

My Pink Stamper (Spook-alicious) Stamp Set

DCWV Bewitched Paperstack

Prima PaperFlowers

Bakers Twine

Black & Purple Rhinestones

Button From Stash

Googly Eyes

ATG Adhesive

3D Foam Squares

 

     My Card base was cut at 7"x 5". If you want directions on how to make this comment or email me and I can give you all the details. As you can see I did a lot of matting and there are a lot of different measurement's. My Witch was cut at 3" along with all her layers, except her eyes, cause I knew I wanted to use googly eyes.

     I hope you all can tell by the pictures why this is called a swing card. When you pull on he right side of the card the part in the middle that the witch is on swings around to show the other side. Like I said I just love how this card turned out and I hope my parents will like it to.

     Thank you all for stopping by and have a fa-boo-lous night!!!
Happy Scrapping

Brianna

 

Koala, Thanks to All !!!

Hello Card Lovers,
     I am here with a card for Peachy Keen Color Inspiration PKC-34. I just got the new Create a Critter 2, cricut cartridge so I decided to use that for today's card. Here was the color Inspiration we had to use as inspiration.

Here is what I came up with based on the Color Pallet

 

Front

Inside

Materials Used
Create A Critter 2
Peachy Keen (PK-754 Critter Faces Medium)
DVWV Paper
My Craft Spot (Thank You Stamp Set)
Buttons From Stash
Rhinestones From Stash
Cuttlebug Embossing Folder
Emery Board
Purple, Grey, Pink Bakers Twine
3D Foam Squares
Black, Pink & White Gel Pens
Pebbles Chalk
ATG Adhesive
Scotch Quick Dry

     I Just love how this card turned out, I just loved this color pallet. I tried to incorporate all the colors, I actually think I did to. My Finish card measures 5.25 x 4.25. My Pretty little Koala was cut at 3.5 inches along with her accessories. If you would like measurements for mats and layers please contact me and I will let you know all the details.

     By the way I am in the process of opening up my Etsy shop. I will be listed as HappyScrapper25. I will do a post when it's open, you can purchase my cards, along with some other homemade embellishments I have in the works :)

    Thank you all for stopping by it is much appreciated !!!

 

 Happy Scrappin"

Brianna

Spooky!!

Hello Card Lovers,
    I get more and more excited as the days go on for October to come. I just love Halloween so much. I even have been contemplating putting my Halloween decorations up. I know some of you probably just giggled about that thought. I am a person who would rather put decorations up early so that when the holiday is over I can take them down right away.
     I am also excited cause my son will be 16 months this October and I am so super excited to get him dressed up to go trick or treat. I think I finally decided on his Halloween costume, it's a character that my all time favorite actor plays... Edward Scissor Hands . I just love Johnny Depp, its funny cause when you walk into my craft room all you see are owls and Johnny Depp lol. My husband is aware of my obsession, I told him when we met Johnny has been in my life for a long time and that he needs to understand that.
     Well I am really here because I made a project for the Halloween challenge going on over at Little Scrap Pieces. I decided to not make a card this time and I opted for a Treat Box instead. I plan on giving these to my Boss and my Employee for Halloween this Year. Here is what I made...

Materials Used

Close to my Heart (Artiste Cricut Cartridge)

My Pink Stamper Spook-alicious Stamp set

DCWV Bewitched Cardstock

Studio G Bakers Twine

Button From Stash

Studio G Purple Rhinestones

Green Paper Flower From Stash

Hot Glue

Momento Tuxedo Black Ink

ATG Adhesive

Candy

   

  So I was super excited to finally use my Artiste cricut cartridge, I just received this last week and this is the first time I have gotten to play with it. All my cuts are from this Cartridge with list cut sizes below. I just love how this little treat box turn out, I just hope my Boss and Employee like it just as much. Thank you all for stopping by and Happy Scrappin"

Brianna

 

Coffin is cut at 7" top and bottom

Rosette: 1.5" x 2

Accent Behind Rosette 4"

Banner: 0.5" x 2

 

Tis' The Season !!!

Hello Card Lovers,
      Well I am here with yet another Chrsitmas card to show you. I will be entering this card into two different challenges, Cardz TV (Happy Holiday) & Fantabulous Cricut Challenge (On The Job).
    For the Challenge going on over at Fantabolous cricut challenge, I wanted to think out side the box on his theme. This man featured on my card works year round, he doesn't ever get a break. He is to busy making his list an checking it twice, can you guess who I am talking about.... that's right Santa, I know him !!!
     I don't know why I have been hooked on Christmas cards. I actually stress out about Christmas, you could kinda say I am Santa's helper in a way. I manage my local UPS location and let me tell you December is NUTS . I have been at my job for 7 years, I absolutely love it, especially the people, but December is a little crazy at times.
     Well enough about me, on Dasher on Dancer, Oh wait I meant on with the card....

Materials Used

Cricut Imagine Cartridge (The Good Old Days)

Scrappy Moms Stamps (The Charmed Life)

Star Dust Stickles

Snowflake From Stash

Cloud9 Design Blue Rhinestone

White Pearls

3D Foam Squares

CuttleBug Snowflake Embossing Folder

Tim Holtz (Tumbled Glass) Distress Ink

ATG Adhesive

Fiskars Corner Punch

 

     My card base measures at 4.75x4.75. My Santa and background are cut at 4". I cut the strip of red paper at 1.5". All of my papers were also printed using the cartridge listed above. I Cut my Santa out Twice that way I could cut all his layers out separate so I could pop them up.

     I used stickles on all the white on my card, except the two little snowflakes on the wings of the airplane. I knew I wanted to emboss the background to give it a little extra touch, I then just went around the edges with my distress ink to make in stand out better.

     Well I hope you all enjoyed this Christmas card. Feel free to ask any question you may have. Thanks for stopping by and Happy Scrappin"

Brianna 

Oh, back to school, back to school.

Hello Card Lovers,
   I am here with a school card to show everyone. I don't yet have any children that are old enough to attend school, my little peanut will only be turning 15 months but I still had a blast making this card.
   I will be entering this card into a couple different challenges, I will list them at the bottom. Here is what I came up with....

Materials Used

The Good Old Days Cricut Imagine Cartridge

Studio G Rhinestones

Yellow Bakers Twine

Red MS Glitter

3D Foam Squares

ATG Adhesive

Cuttlebug Swiss Dots Embossing Folder

 

     This was such a quick card to make and it didn't take many supplies to make it either. All my papers were printed using this cartridge.

     My card base measures 5.25x4.5. My mats are cut out at 4.2 and 3.9. I put a 2" strip of teal paper that I embossed behind the mats. I cut my sweet little school boy out twice at 4", I cut him once all together then once in layers so I could pop him up. I cut the sentiment out at 2" and that is from the same cartridge.

       One thing I love about the cricut Imagine, you have a never ending supply of paper you never have to worry about running out .

    Challenges Entered:

Tuesday Throwdown: Back to the Books

Little Red Wagon: Back to School

Die Cuttin Divas: Back to School (Sketch Challenge)

     Hope you all enjoyed this cute quick little card. Thanks for stopping by and Happy Scrappin"

Brianna



 

 

Warmest Wishes

Hello Card Lovers,
   I am here with a,do I dare say, Christmas card. I will be entering this card into four different challenges, I will list them at the bottom of post. OK, so the reason I made a Christmas card is because I just bought this cartridge. I know its an older one but its new to me and I was excited to use it . This card I made using my Gypsy so I could weld and make a shape card, I  also used the Winter Frolic cricut cartridge. Here is what I came up with....

Materials Used

Winter Frolic Cricut Cartridge

Peachy Keen (Funshine Face Parts)

Scrappy Moms (The Charmed Life) Stamp Set

Paper From Stash

Pebbles Chalk

Blue Rhinestones

Pink Bakers Twine

Snowflakes From Stash

3D Foam Squares

ATG Adhesive

     My Card is cut at 4.5 Inches. I cut my card a little bit smaller cause I still wanted it to fit into an A2 size envelope. My little adorable snow angle girl is also cut at 4.5 inches along with all her layers. I Just love this cartridge, there are so many cute images on it. I just love how it turned out.

     Challenges that I am entering this card into are... 

Scrappy Moms Stamps Blog (Shape Up)

Peachy Keen (Anything Goes)

Little Scrap Pieces (Use Pink)

Bitten By The Bug 2 (Shape Card)

     I hope all of you enjoy, feel free to ask any questions.

Thanks & Happy Scrappin"

Brianna



You mean the WORLD to me

Hello Card Lovers,
        This card that I will be showing you all I made for my Husband. I have been sick for the past three weeks and even had to go to the hospital this week after blacking out. To keep the story short I just wanted to tell my Husband thank you for helping me out and being there for me .
      This card will be entered into two different challenges, Cardz T.V. (Red, Yellow, Blue) & Tuesday Throwdown (Use Bold Colors). Here is what I came up with....

Materials Used

Give a Hoot Cricut Cartridge

Darice Embossing Folder

DCWV Cardstock

Ribbon From Stash

Buttons From Stash

Blue Bakers Twine

Computer Generated Sentiment

Glossy Accents

3D Foam Squares

Friskars Corner Punch

     My card base measures at 4.25x4.25, white layer 2", blue layer 1 6/8, yellow layer 1.5". My World is cut from page 39 at 3.5". I  filled in all the blue on my world with Glossy accents to give it the effect of water, sorry its hard to tell in photo. I generated the sentiment in Microsoft word and font is at 12pt.

     I hope you all enjoy my colorful card, I hope my Hubby likes it to !!!

Thanks & Happy Scrappin"

Brianna

Happy Birthday Human

Hello Card Lovers,
      I am here with a Child's birthday card that I made to enter in the challenge going on over at Celebrate The Occasions Blog.
      I recently realized why I bought the cricut lite cartridge "Bump In The Night". This cartridge has so many cute images on it that can go with many different themes. Of course I had to own it as soon as it was released so I paid full price for it, however if you really like the cartridge I know Walmart is marking them down for $20.00.
     Well on with my birthday card, here is what I came up with.....

Materials Used

Cricut Lite (Bump In The Night)

DCWV Pattern Paper

Solid cardstock from local scrapbooking store

Darice Embossing Folder

Button From Stash

Green Bakers Twine

Computer Generated Sentiment

Google Eyes

Black Gel Pen

3D Foam Squares

     Sorry about the bad lighting!!I plan on buying a new camera real soon.My card is a portrait style card and measures at 5.25x4.25. If you would like measurements for all the other layers feel free to ask. I generated my sentiment in Microsoft works and font is at 14pt.

     I kept the colors neutral so this card could be giving to a boy or a girl. I just love how my cute little monster turned out. I Hope you all enjoy it as well :)

Thanks & Happy Scrappin"

Brianna